Honeywell TH8000

[Denopoly]

Hi, I got two white wires, the white wire on left is plugged into a terminal block that is blank or unlabeled white wire on the left is plugged into W. 

So what I'm reading is this....

RC, R, W, Y, G and White wire on left side is in an unlabeled  terminal.

Is this compatible with my nest and if so  how should I plug the cables in to the nest block?

[CoolingWizard]

Hello Denopoly, do you know if you have a conventional air conditioner or do you have a Heat Pump?

Ken, The AC Cooling Wizard

[Denopoly]

Conventional according to wire diagram on the cover 

[CoolingWizard]

Can you take a picture of the manufacturer label on the outdoor unit and upload it here? I can check the Model number and verify the type of system it is?

Ken, The AC Cooling Wizard

[Denopoly]

 

Hope these photos are ok

[CoolingWizard]

Pictures are OK, the manufacture model number handy? And the part that is outside. 

[Markjosephp]

Hi there,

Thanks for assisting, Ken.

@Denopoly, I'm just checking in to make sure that you've seen Ken's response. This is for us to determine your systems' compatibility with the Nest Thermostats. Please let us know if you have any additional questions or concerns.

I look forward to your response.

Best regards,

Mark

[Markjosephp]

Hello Denopoly,

I wanted to follow up and see if you are still in need of any help. Please let me know if you are still having any trouble from here, as we would be happy to take a closer look and assist you further.

Best regards,

Mark

[Markjosephp]

Hi Denopoly,

Chiming in to check if you have additional questions or concerns, as we will be locking this thread in 24 hours.

Best regards,

Mark