cancel
Showing results for 
Search instead for 
Did you mean: 
Replies are disabled for this topic. Start a new one or visit our Help Center.

N260 error after a year

HzrInAz
Community Member

I installed the nest a year ago without a common wire and it has worked fine until now. I had it off for a month as the weather didnt dictate heat or cooling. When I turned it back on, I get the N260 note. Is it because it was off? Will it recharge itself and be ok or eventually stop working? I dont know why it passed the compatibility test when I installed it and worked for a year. TIA for an tips.

10 REPLIES 10

od
Community Member

Exact same thing happened to me today.  I have had my Nest set up for over a year.  No c wire but had been working fine to call for heat and set temp manually as needed until today.  All I have needed to do throughout the year is change the batteries every now and then.  Today I have an error message   System Issue - n260 and the thermostat is now inoperable and not calling for heat.   

HzrInAz
Community Member

Mine is still working. I have it programmed and it also works manually. The screen will not light up with proximity setting  any longer though. 

Kayhy
Community Member

Same thing happened with me my husband installed it a few months ago it worked perfectly fine nothing wrong with it it passed the connector thing and now all of a sudden the beginning of the week it was freezing out so I decided to ask Google to turn the heat on the heat ran perfectly fine it was the first time I used heat because I live in Florida and we don’t usually use heat but it was cold so I wanted to get the chill out and when we had set up the thermostat we checked both heat and air and they both worked fine so anyway  after that as I was walking past the thermostat is it light up anymore so I went to check it and I noticed it had this note n260. I have been researching it it says it’s a power connector problem but we didn’t have this problem before so why does this all have to be redone again with a power connector isn’t there someway to bypass it

Rfrickey
Community Member

Did you ever get an answer?! I’m having the same problem!   

HzrInAz
Community Member

I ended up running a common wire and it seems to have fixed it. I tried the google power supply and it didnt work.

GinaL
Community Member

Hello how do we run a common wire? Can this be done by us or do we need to call a professional?

ozbarsi
Community Member

I get a n260 error.  I changed the batteries and ran for about 5 minutes and quit again.  Did it again with the same result.  HELP

EdwardT
Community Specialist
Community Specialist

Hi ozbarsi,

 

Thanks for reaching out. I'm sorry to hear that you're having an issue with your Nest Thermostat. The message that you're getting means that your thermostat might need a C wire or the Nest Power Connector to provide it with dedicated power. If you haven't yet, please check this link to learn more about this.

 

Thanks,

Edward

EdwardT
Community Specialist
Community Specialist

Hi ozbarsi,

 

It's me again. I wanted to check back in to see if you have other questions and concerns. Feel free to let me know if you do. 

 

Thanks,

Edward

Jake
Community Specialist
Community Specialist

Hey there,

 

I wanted to check in with you, and let you know that I will be locking the thread in 24 hours.

 

Best regards,

Jake