12-01-2022 02:58 PM
Hi,
I'm switching from a Honeywell to a Nest thermostat.
The following wires are in use on the Honeywell one:
- R < red
- C < blue
- W-O/B < white
- Y < yellow
- G < green
On the Nest side I connected as follow:
Rh, C, W1, Y, G All my equipment (heating, cooling and fan) are detected. However, when performing a test, nothing fires up
I then moved the white wire from W1 to O/C to no avail.
Same when moving the red wire from Rh to Rc.
When putting the Honeywell thermostat back on, everything is working just fine.
What am I missing?
12-05-2022 05:01 PM
Hi nick_r,
Thanks for reaching out. I'm sorry to hear that you're having an issue with setting up your Nest Thermostat. I'd love to know more about this and I have a few questions:
Looking forward to your response.
Thanks,
Edward
12-05-2022 08:21 PM
The issue ended up being hardware related: defective base
12-05-2022 09:17 PM
Hi nick_r,
Thanks for the update. Were you able to get a replacement for the base?
Thanks,
Edward
12-08-2022 06:13 PM
Hi nick_r,
It's me again. I wanted to check back in to see if you have other questions and concerns. Feel free to let me know if you do.
Thanks,
Edward
12-12-2022 02:40 PM
Hi nick_r,
I'm just checking in to make sure that you've seen our response. Please let us know if you have any other questions or concerns as I will be locking this in 24 hours.
Thanks,
Edward