10-19-2021 05:15 PM
My system is forced air cooling and hot water heating. I installed the Tstat in the summer. It cools very well.
today I switched it to heating. Turned up the temp, and when it called for heat, the FAN turned on. It is obviously wired wrong. Which wires do I switch to get the nest to call for heat?
10-20-2021 02:33 AM
That’s how I did it
G - fan
Y1 - cool
W1 - heat
C - 24V common
RH - power
11-30-2021 03:27 PM
Hey Scottd,
Apologies for the late reply. I wanted to follow up and ensure you are good to go. Please let me know if you are still having any trouble with the wiring from here, as I would be happy to take a closer look and assist you further.
Best regards,
Jake
12-02-2021 12:08 PM
Hey Scottd,
I want to ensure you are good to go, and everything is working properly. Please let me know if you are still having trouble, as I will be locking the thread in 24 hours due to inactivity.
Best regards,
Jake
12-03-2021 10:56 AM
Hey Scottd,
It has been a few days since the last reply, and I am going to lock the thread at this time. If you have any questions, please feel free to create a new post.
Best regards,
Jake