07-05-2022 11:46 AM
Hi,
I tried to read some other conversations but it's still not clear as to the solution for the R to Rc jumper. I have attached two pictures for reference. As you see the existing wiring on the wall is G, W, Y, R & Rc (R & Rc jumped). Please let me know if it's compatible and how I should wire it and if there is a need for C wire or should I just wire the red to R and leave Rc empty?
Answered! Go to the Recommended Answer.
07-05-2022 02:39 PM
Ignore the jumper. R & RC are just R.
07-05-2022 02:39 PM
Ignore the jumper. R & RC are just R.
07-05-2022 07:05 PM
Thanks, and the other as G W and Y put them in Y1 G1 or W1, right?
07-05-2022 07:16 PM
I believe so. Just be careful on what the old screws are marked. If you have a heat pump, or not.
In the app setup, you can double check your wiring. I had to revisit mine, to get my fan (G) working.
07-07-2022 01:03 AM
Hey folks,
Thanks for your help here, Rhudi.
pkbooh, how's your thermostat now? I hope you're able to successfully set it up. Let us know if you still need our help.
Best,
Melba
07-11-2022 11:49 PM
Hey folks,
We haven't heard from you in a while so we'll be locking this thread if there is no update within the day. If you have any new issues, updates or just a discussion topic, feel free to start a new thread in the Community.
Best,
Melba
07-12-2022 05:13 AM
All good now. It was installed and is working correctly.
07-12-2022 08:10 PM
Hey pkbooh,
Awesome and thanks for getting back to us. We're glad to hear that you now have a thermostat that is working as it should.
Feel free to reach out should you have further questions.
Best,
Melba
07-15-2022 08:12 PM
Hi,
We haven't heard from you in a while so we'll be locking this thread if there is no update within the day. If you have any new issues, updates or just a discussion topic, feel free to start a new thread in the Community.
Best,
Melba