cancel
Showing results for 
Search instead for 
Did you mean: 

R to Rc jumper

pkbooh
Community Member

Hi, 

I tried to read some other conversations but it's still not clear as to the solution for the R to Rc jumper. I have attached two pictures for reference. As you see the existing wiring on the wall is G, W, Y, R & Rc (R & Rc jumped). Please let me know if it's compatible and how I should wire it and if there is a need for C wire or should I just wire the red to R and leave Rc empty?

IMG-20220704-WA0006.jpgIMG-20220704-WA0007.jpg

1 ACCEPTED SOLUTION

Rhudi
Community Member

Ignore the jumper.  R & RC are just R.

View solution in original post

8 REPLIES 8

Rhudi
Community Member

Ignore the jumper.  R & RC are just R.

pkbooh
Community Member

Thanks, and the other as G W and Y put them in Y1 G1 or W1, right?

 

Rhudi
Community Member

I believe so.  Just be careful on what the old screws are marked.  If you have a heat pump, or not.

In the app setup, you can double check your wiring.  I had to revisit mine, to get my fan (G) working.

MelbaDT
Community Specialist
Community Specialist

Hey folks, 

 

Thanks for your help here, Rhudi. 

 

pkbooh, how's your thermostat now? I hope you're able to successfully set it up. Let us know if you still need our help. 

 

Best, 

Melba

MelbaDT
Community Specialist
Community Specialist

Hey folks, 

 

We haven't heard from you in a while so we'll be locking this thread if there is no update within the day. If you have any new issues, updates or just a discussion topic, feel free to start a new thread in the Community.

 

Best, 

Melba

pkbooh
Community Member

All good now. It was installed and is working correctly. 

MelbaDT
Community Specialist
Community Specialist

Hey pkbooh, 

 

Awesome and thanks for getting back to us. We're glad to hear that you now have a thermostat that is working as it should. 

 

Feel free to reach out should you have further questions. 

 

Best, 

Melba

MelbaDT
Community Specialist
Community Specialist

Hi, 

 

We haven't heard from you in a while so we'll be locking this thread if there is no update within the day. If you have any new issues, updates or just a discussion topic, feel free to start a new thread in the Community.

 

Best, 

Melba