08-09-2022 07:51 AM
Hi All,
Picked up a Nest Learning Thermostat and want to be sure I am correctly setting up the wires.
Here is the original thermostat set up:
Here is how I configured it:
Here is my current HVAC system:
https://www.theacoutlet.com/15pjl36a01-3-ton-15-seer-rheem-ruud-heat-pump.html
My concerns are:
Thanks so much in advance. (I know there are countless posts like this, but couldn't find anything with my exact system).
08-12-2022 10:06 PM
Hi derekt,
Thanks for reaching out. Based on the photo, it looks like the wiring is correct. The white wire should be fine with the W1 terminal as long as you programmed it as emergency heat during the setup.
Thanks,
Edward
08-13-2022 02:34 AM
Hi @EdwardT i ended up putting it into W2, as it seemed to line up with this article. https://christierney.com/2017/02/24/nest-thermostat-and-heat-pumps-w-aux/
but it shows as brown in my app, not white.
08-13-2022 02:35 AM
08-16-2022 09:11 PM
Hey there,
We usually do not rely on the color of the wires alone. The most reliable method is to use the labels of the terminals where the wire was connected to on your original thermostat or trace what terminal is the wire connected to your HVAC's control board.
Best,
Melba
08-20-2022 12:24 AM
Hey derekt,
Checking back in should you still have some questions here. Let us know by replying to this thread.
Best,
Melba
08-21-2022 03:25 AM
Thank you but where does one find their hvac board?
Also I provided original thermostat screenshot. Did that help?
08-24-2022 10:34 PM
Hi derekt,
Thanks for the response. The wiring of your Nest Thermostat looks correct based on the photos that you've sent. How's it going? Do you notice anything unusual?
Thanks,
Edward
08-29-2022 03:57 PM
Hi derekt,
It's me again. I wanted to check back in to see if you have other questions and concerns. Feel free to let me know if you do.
Thanks,
Edward
08-30-2022 05:00 PM
Hi derekt,
I'm just checking in to make sure that you've seen our response. Please let us know if you have any other questions or concerns as I will be locking this in 24 hours.
Thanks,
Edward
08-31-2022 02:06 PM
Hi Edward,
Its summer here so I haven't had any need to turn the Heat on yet.
08-31-2022 07:53 PM
Hi derekt,
Thanks for the response. Like I mentioned on my previous reply, your wiring looks correct. I will be closing this thread now but in case anything comes up, please feel free to create a new thread and we'd be glad to assist you.
Thanks,
Edward