Been running starlink V2 for 12 months now, with an ethernet adaptor jumpered across the house via cat6 from a closet taking the feed through to the lounge where I have split the signal via a simple hub through to a meshed google nest. Has worked fine for a year with Starlink not in bypass, and the google mesh feeding the TV and household wireless. The starlink router used to drop connectivity to the google nest occasionally requiring a reboot (I rebooted the starlink and google devices to fix the issue). 2 days ago it dropped and didn't come back. I tried numerous configurations, but the symptom was that the internet would work after a reboot, but only for about 5 minutes and then connectivity to the google nest would drop. The starlink router was still ok and you could connect direct. Finally I put the starlink device into bypass mode, after a factory reset and it fixed the issue. Strange that it would run fine for 12 months and then suddenly break with zero changes at my end and require bypass mode to work?
