the Google Mesh Router IP

[seans]

I want to use 10.50.39.1 as the router IP but when I go to save the settings, thay are not accepeted. Is the google mesh router capable of working with different IP ranges?

[olavrb]

As long as the IP is RFC 1918 compliant, it should work as far as I know. I escalated the thread in hope for more information.

[MichaelP · Accepted solution]

Hello @seans 

Just to add to what @olavrb mentioned, I have seen this happen when the outer network is already on the 10.x.x.x network with a matching prefix and netmask.

[olavrb]

As long as the subnets doesn't collide it should work. But we haven't got any official response on this yet AFAIK, even though it has been discussed several times in the past.

[seans]

I think you are right about the WAN network. I need to change that before changing the LAN setup.

[EdwardT]

Hi folks.

@olavrb and MichaelP, we appreciate the help as always!

@seans, I hope that MichaelP and olavrb's response answered your question. Let us know if you have other questions and we'd be glad to help.

Thanks

Edward

[EdwardT]

Hi seans,

It's me again. I wanted to check back in to see if you have other questions and concerns. Feel free to let me know if you do. 

Thanks,

Edward

[seans]

Havn't had time to imlement the solution yet but I'm very certain it will work.

[EdwardT]

Hi seans,

Got it. I'll keep this thread open until you get to try the solution. Keep us posted.

Thanks,

Edward

[EdwardT]

Hi seans,

I wanted to follow up and see if you are still in need of any help. Please let me know if you are still having any trouble from here, as I would be happy to take a closer look and assist you further.

Thanks,

Edward

[EdwardT]

Hi seans,

I'm just checking in to make sure that you've seen our response. Please let us know if you have any other questions or concerns as I will be locking this in 24 hours.

Thanks,

Edward