cancel
Showing results for 
Search instead for 
Did you mean: 
Replies are disabled for this topic. Start a new one or visit our Help Center.

Google Nest Doorbell wired

JimPaseo
Community Member

I have a Google Nest Doorbell wired device.  I have it all set up but the picture is upside down because of how I had to use the mounting bracket.  Where can I adjust settings to rotate picture 180 degrees? I read some info and it said look under settings, rotate picture, but I can't find that.

1 Recommended Answer

MplsCustomer
Bronze
Bronze

@JimPaseo 

I think the "Rotate image" option is only available on cameras and not on doorbells. It is NOT available on our own Google Nest Hello Doorbells, and in this post, on 2/2/2022, a Google Nest Community Specialist said: "It is not possible for the camera's view to be switched as this was not built into the device [Nest Hello Doorbell]."

https://www.googlenestcommunity.com/t5/Cameras-and-Doorbells/Nest-Doorbell/m-p/57449

View Recommended Answer in original post

4 REPLIES 4

MplsCustomer
Bronze
Bronze

@JimPaseo 

I think the "Rotate image" option is only available on cameras and not on doorbells. It is NOT available on our own Google Nest Hello Doorbells, and in this post, on 2/2/2022, a Google Nest Community Specialist said: "It is not possible for the camera's view to be switched as this was not built into the device [Nest Hello Doorbell]."

https://www.googlenestcommunity.com/t5/Cameras-and-Doorbells/Nest-Doorbell/m-p/57449

Hi folks,

 

I just wanted to jump in real fast to see if you saw MplsCustomer's reply and to see if you still needed some help on this or if you were able to get it sorted out. If you are still needing some help, just let us know and we'll be happy to continue helping.

 

I appreciate the help, MplsCustomer.

 

Thanks,

JT

janthadeus
Community Specialist
Community Specialist

Hi JimPaseo,

 

It's me again. I want to check if you still need help. Don't hesitate to reach back if you do. 

 

Regards,

JT

janthadeus
Community Specialist
Community Specialist

Hey there,

 

I just wanted to jump in here to make sure that you saw my response. Please let me know if you have any other questions or concerns as I will be locking this in 24 hours.

 

Best,

JT