Strange issue. Wired doorbell mechanical chimes with chime connector properly wired in circuit works fine (chimes ring properly when doorbell button pushed) when IPhone Nest and Home apps turned off, but don't work properly when either app turned on. (Chime striker moves a little then, but insufficient to make chime sound.) Transformer upgraded to 16 volt 30VA.
Internet is through Hughesnet satellite. Any thoughts or suggestions welcome.
Answered! Go to the Recommended Answer.
If the voltage is correct try the following steps: Go into the Nest App, Doorbell > Settings
Make sure the the Indoor chime is on
Scroll down and look for Chime duration and set to 3 seconds
Set back to 1 second so it wont burn out, or try turning off again (where ever you had it before)
That should work
I apologize for my late response and thank you for all of your patience while waiting for a reply. I can definitely understand how frustrating your situation must be, but I wanted to make sure that your issue was addressed.
Please let me know if you need further assistance.