06-16-2022 05:22 PM
I have multiple nest products including a wired cam, a wireless cam, and a doorbell. I purchased another new wireless camera and when I try to add it to the app it reads the QR code and then kicks me right back to the home screen on the app.
I have tried resetting the camera with the hard reset button and tried adding it by manually entering It's serial number..
Nothing works.
Help!
Answered! Go to the Recommended Answer.
06-17-2022 06:22 AM
UPDATE:
I used a Samsung tablet i have previously installed google home onto.
I opened home, add device, scan QR code , and start setup.
This functioned correctly. The Camera was seen, updated connected to my Wi-Fi and it is all good.
Id still like to know why this failed when using my Google Pixel 6 pone and the google home app.
PC.
09-13-2022 05:07 PM
Hey folks,
I just wanted to follow up to see if you still need our help. Please let us know as we would be happy to answer any questions you may have.
Thanks,
Archie
09-14-2022 06:26 PM
Hey everyone,
Just checking in to make sure that you've seen our responses. Please let me know if you have other questions or concerns as I will be locking this in 24 hours if I won't hear back from you again. Feel free to start a new thread and we'll be happy to help.
Thanks,
Archie
06-16-2022 07:53 PM
I’m having the same issue. I’ve got several devices in my home and for some reason I cannot find this wireless camera when I search for new device, then when I specifically choose to snap the QR code it won’t connect to assisting device. I just returned a camera because of this and now the replacement is the same..
06-16-2022 09:00 PM
Same issue for me too. I enter the QR code manually or scan and it just flicks me back to the home page with the device list. Setup wont continue and factory reset wont work either.
06-29-2022 10:12 AM
Hi Jackson,
I'm having the exact same issue. Did you end up coming up with a solution?
I tried using a different device like PC suggested but it still didn't connect
09-09-2022 05:54 PM
Hey folks,
I'm sorry for the delay. A few questions: What type of Nest camera do you have? Does the phone you use have a QR code scan feature? Is this the first time you’re installing the device? Also, are they scanning the QR code in a well lit environment? Keep us posted.
Thanks,
Archie
09-13-2022 05:07 PM
Hey folks,
I just wanted to follow up to see if you still need our help. Please let us know as we would be happy to answer any questions you may have.
Thanks,
Archie
09-14-2022 06:26 PM
Hey everyone,
Just checking in to make sure that you've seen our responses. Please let me know if you have other questions or concerns as I will be locking this in 24 hours if I won't hear back from you again. Feel free to start a new thread and we'll be happy to help.
Thanks,
Archie
06-17-2022 06:22 AM
UPDATE:
I used a Samsung tablet i have previously installed google home onto.
I opened home, add device, scan QR code , and start setup.
This functioned correctly. The Camera was seen, updated connected to my Wi-Fi and it is all good.
Id still like to know why this failed when using my Google Pixel 6 pone and the google home app.
PC.
06-23-2022 10:02 PM
I recently purchased a Nest cam battery and had the same connection issues. The solution was to remove my nest doorbell from the Google Home app (and took the doorbell itself out of wifi range) and re run the Camera installation and it worked fine. Adding the doorbell back was easy as it remembered the wifi credentials. Interestingly I didn't need to remove my google home hub (gen 2).