09-19-2024 06:17 PM - edited 09-19-2024 06:20 PM
Hi,
I am attempting to install my Nest gen 3 but the condenser outside keeps turning off and on. No air is coming out. I believe I wired the thermostat right? Any help?
09-19-2024 08:03 PM - edited 09-19-2024 08:08 PM
Oh, I forgot to mention that the base station is not charging/powering the Nest.
Here is a photo of the original wiring layout.
09-20-2024 11:46 AM
You have the Nest wired wrong.
You can't go by the wire colors as there is no standard.
Try this wiring,
Blue - W to W1
Red = RH to Rc (jumper to RC not needed)
Yellow - Y to Y1
Green - G to G
The white and brown wires are unused and should be taped off at the thermostat.
I would suggest using the brown wire and connecting it to both ends' C terminals.
09-20-2024 07:52 AM
@Rbucki , you have what appears to be a conventional system. Your heating wire on W is blue. You appear to have a white wire not being used?
AC Cooling Wizard