01-21-2022 02:05 PM
So we bought a home a year ago and I can't add one of my nest protects because it is too high on the ceiling (out of reach) for me to scan the barcode. Is there a way to add the product by long pressing the button if I find a pole or something to reach it?
01-28-2022 10:35 PM
Hey Camroonnnn,
Sorry for the delayed response but thanks for reaching out to the Google Nest Community.
I'm afraid that in order to add a Nest Protect to your Nest account through the Nest app, you really need to take it down to scan the QR code or enter the entry key nest to it. I also suggest that you write down the Entry Key for each Protect you install and keep this number in a safe place in case you need to redo the setup in the future,
Best,
Melba
02-01-2022 07:44 PM
Hey there,
Checking back in — let me know if you still need our help.
Best,
Melba
02-02-2022 02:47 AM
Thanks, I'll just have to find a really long ladder at some point.
02-03-2022 07:22 PM
Hi Prabs,
You're welcome and I'm sorry for the inconvenience. We'll also take your experience as feedback as we're also open for ways to improve. Keep an eye out on this Community page or follow our social channels for news and updates.
Best,
Melba
09-04-2022 03:31 PM
It is extremely bad and thoughtless design to put essential information on the back of a device that is intended to be attached to the ceiling. Ring puts their QR code on the side of their devices, which is much smarter. Google should update its software to read the BIOS of the device to get the necessary codes.
06-29-2022 04:23 PM
This is an issue I wish would get fixed - I have 20 foot ceilings. To install it the first time, we did it while painters had scaffolding in the house. With the requirement to scan the QR code, I simply won't be able to add them to my account. And it'll likely drive my purchasing decision in a different direction when we replace the other smoke detectors.
09-04-2022 03:34 PM
Ditto ! There is a way to wipe it without taking it down but then you still need the **bleep** code to set it up...
11-02-2022 11:45 AM
Hi folks,
Thanks for posting here in the community and sorry for the delay. All the setup codes and QR codes are unique to each Nest device that's why during setup you really need to get it or scan it from the actual device. Hit this link for more information. If you have other questions and concerns, feel free to let me know.
Regards,
Emerson
11-05-2022 12:18 PM
Hello everyone,
I just wanted to follow up and see if you still need any help. Let me know if you have any additional questions from here.
Thanks,
Emerson
11-07-2022 09:38 PM
Hi there,
Due to inactivity, I'll go ahead and lock this thread in 24 hours. Feel free to start a new thread if you need assistance with your Nest devices and we'd be glad to assist you further.
Best,
Princess