This what I think I can see. You have a red wire going to RH with a red jumper wire going to RC. This is the incoming ~24VAC control power. You have a Green wire going to the G terminal. The other wires are hard to see, you need to move the unconnected wires up and out of the way so we can see where the Yellow wire and the White wire are going. Typically the yellow wire goes to the Y terminal and calls for cooling when energized by RC. The White wire normally goes on the W terminal and calls for Heat when energizes by the RH. It looked like Blue, Gray, Orange, Pink, Brown, and perhaps Black are not connected to a terminal.
Ken, The AC Cooling Wizard
NestPro, Google Pro, Mechanical Engineer and HVAC service company owner.
If my answer solved your problem, click Recommend this Answer below, and If it helped you, please give a Kudo.
