11-29-2022 05:45 PM
11-29-2022 09:07 PM
Any labels on the screw terminals I can't see the picture is not clear.
Looks like it is a standard system and should be compatible.
11-30-2022 06:48 PM
It’s R, i +, i-, C
it’s not compatible 😞
11-30-2022 07:08 PM
What kind of system is this? Heat and AC or just heat? If the equipment has standard terminal screws labeled like the Nest it will work. This might be a special thermostat you have that can be removed and a Nest used if you can provide the info on the system end Make and Model and pics of where the thermostat wires connect to it.
11-30-2022 07:12 PM
It is both heating and cooling. It’s a Lennox system meant for Lennox iComfort thermostat. I have someone coming to see if they can still install the nest. This is one of the only systems that’s not compatible with the nest. I spoke to a Google rep.
11-30-2022 07:17 PM
The Lennox has 2 sets of terminals one is for the iComfort thermostat and next to it is standard screw terminals for a Nest or any thermostat.
11-30-2022 07:19 PM
So you can just move the wires to R W1 Y1 C G on the furnace and then put the Nest using same wires to same terminals on the Nest
11-30-2022 07:29 PM
Thank you!
12-05-2022 10:26 AM
12-08-2022 10:45 AM
Hey there,
Checking back in should you still have some questions here. Let us know by replying to this thread.
Best,
Mel
12-08-2022 07:08 PM
Thermostat is in and working well. Thanks for all the support.
12-08-2022 07:55 PM
Hi avoros18,
Thanks for the update. I'm glad to hear that it's working fine now. I will be locking this thread in 24 hours. Please feel free to create a new thread should you have some more questions or concerns in the near future and we'll be more than glad to help.
Thanks,
Edward