12-21-2022 11:05 AM
Hi! Larry’s daughter here. Dad texted at 5:30 this morning that the heat was out (again.) Goettl was here two days ago and said they couldn’t find an issue with the furnace. We decided to switch the thermostat out but I did not take a picture of the wiring before I removed the old one. There are the wire colors. Yellow, blue, white, red and brown. When I put the wires in I get a message during set up that they are not detected. I’m going with yellow (Y), blue (C), white (W), red(R) and brown (*OB). I am trying to get the HVAC company to come back out but they can’t come until tomorrow.
Thank you in advance for any assistance! ♥️
12-21-2022 11:08 AM
This is the old thermostat
12-28-2022 01:52 PM
Hello LarryBarnhouse,
I'm sorry for the trouble this may have caused you; let's see what's going on.
To isolate:
Please let us know how it goes.
Thanks,
Mark
01-02-2023 08:43 AM
Hi there,
I'm checking back in. Were you able to do the steps above? I'd be glad to hear from you, and I'd like to make sure everything is working.
Thanks,
Mark
01-03-2023 02:08 PM
Hi LarryBarnhouse,
I'm checking in to make sure that you've seen my response. Please let us know if you have any additional questions or concerns before we lock this thread in 24 hours.
Thanks,
Mark