What is Nest Aware? Read more
Hey Nest Community, Some of you have encountered an issue between Nest Wifi Pro version 3.73.406133 and older versions of Nanoleaf Essentials products (below version 3.6). There is an incompatibility which causes Nanoleaf Essentials devices to become...
Here are some steps I recommend to resolve issues during the setup of Nest Wifi Pro, Nest Wifi, or Google Wifi.Before trying these stepsMake sure that you purchase your Wifi device(s) from the same country where you'll be using them. Since wireless r...
I have a(n old) triple story concrete house with limited cabling possible. Here is a diagram of my my setup with which I am getting reasonable coverage. I have fairly limited networking knowledge.I think there is a clash between the Google Mesh route...
Is there a way to manually switch from 5.0 to 2.4 in order to set up these devices?
Hi!Our network is segmented (by VLAN) into a section for each space (totaling 2) on the property and the space monitored by the Nest experienced a periodic outage through the space of about an hour. Devices running in the side closer to the origin ro...
My Google nest are blinking red not sure how to fix it. I unplugged and plugged back in. Restarted router nothing help
Google WiFi used to make devices appear on same network that are connected via different bands. Has this changed? If so, they broke their firmware!All the "smart" 2.4Ghz devices can't handle their controlling devices not being on the same network, bu...
I can’t connect Wi-Fi points to router
I have run speed tests and the Home app says wifi is up and running. However my devices (Laptop and Google Chrome TV devices) keep losing connections. Any suggestions
I have the Nest Wifi Pro 3 pack. One is connected to my modem. The other two I want to hardwire as I have cat 5 outlets throughout the house. I cannot figure out how to get these points hardwired to ethernet so they work together in that manner as th...
For the second time in 2 months, all my 2.4 Ghz devices were disconnected from WiFi and unable to reconnect until I rebooted the entire network. I did look at my wifi diag app and the SSID was being broadcasted normally. No other diagnostics availabl...
Can I use a longer ethernet cable between the router & google wifi - say 8 or 12 ft ?