Are you a homeowner and you are selling your home and leaving your Google Nest Thermostat for the new owner? What do you need to do to make the transfer painless for you and the new owner? First and foremost, DO NOT PERFORM A FACTORY RESET. The Googl...
Here are some steps I recommend to resolve issues during the setup of Nest Thermostats.Before trying these stepsMake sure you're using the correct app for setup. Need help checking which model you have? Use the Google Home app to set up the following...
Is the support okay for this model or is it going to end also .please advise thanks.
Hi All,I would be very greatful for any advice on this perplexing issue i'm having. I recently had a new central air condition system installed. Instead of using a 2nd Nest Thermostat in the same location as my existing Nest I asked the A/C installer...
my heat link has broken down. I have an electrician out here to look at it and has definitely broken down and I have ordered electrician to come and sort it out by you but he hasn’t turned up as now.
I have "regular" Nest Thermostat (not E, not learning) and would like to add an additional sensor just to monitor (remotely) another room (basement) in the house. It appears that the Google sensors only work with E, 3rd gen and 4th gen learning therm...
Hello - I have a V3 Nest and a Drayton LP241 thermostat.When the installer put in the Nest, I assumed he would take out the Drayton but for whatever reason, he has left the it in place. My question is: the Drayton has 4 settings - ON, OFF, TIMED and ...
Our Nest Thermostat starts a/c then seconds later turns off and then starts again. We have done two sessions of tech support with no solution . We were sent a replacement and the same thing is happening again so they are sending another replacement. ...
I just got a replacement Nest thermostat because the one I got last year stopped talking to my router. I attached it to a wall socket with a USB cord and iphone charger, the little green light started blinking, and 8 or so hours later, it’s still bli...
I have a TACO SR503 switching relay that does NOT have dedicated C terminals for each zone. From what I read, I cannot use the 24VAC / COM terminals in the upper left, and instead have to use a separate 24VAC transformer. Is this correct? If so, can ...
My heatlink stop working, not showing any lights. It's only 1 zone with 1 thermostat
I forgot my pin and we changed wifi and now I cannot connect to my nest on the app or on the actual device
