Are you a homeowner and you are selling your home and leaving your Google Nest Thermostat for the new owner? What do you need to do to make the transfer painless for you and the new owner? First and foremost, DO NOT PERFORM A FACTORY RESET. The Googl...
Here are some steps I recommend to resolve issues during the setup of Nest Thermostats.Before trying these stepsMake sure you're using the correct app for setup. Need help checking which model you have? Use the Google Home app to set up the following...
I restarted my Nest thermostat which I inherited with my new house. Everything connected fine before and the thermostat looks to connect whilst the Heat Ljnk is flashing green. However, it won’t link up. I have tried all the resets I can find on the ...
I have four nest thermostats in my home. Had to replace one that broke earlier this year and now Google is not going to let me use the nest app to control my thermostats anymore? Forcing us to buy new thermostats at $150 each is outrageous. My thermo...
cannot access thermostat since the email attached is no longer valid
I was seeking confirmation if my wiring diagram would be correct for a gen 4 thermostat on my duel fuel unit. My unit consists of a primary heat pump then the break point is set to *36 degrees and kicks on propane furnace. I have noticed sometimes wh...
I have had issues almost constantly after installing the Google Nest thermostat. It keeps tripping my breaker box.
I have a 3rd generation Nest thermostat. My current temp is 70 degrees. I turned it up to 72 and it says "in 30 minutes". Why is this happening? It should start to heat up right away.Jody
Does anyone know how to keep the fan on using a NEST 4G Fan even while not calling for AC or Heat without having to reset it every week or another time interval?
Hello,I have a Clean Burn CB 2500 waste oil furnace in my shop and have recently purchased a Nest Thermostat. I have installed the thermostat and have the system working, but I do have a battery drain issue due to not having the nest power adapter in...
Can a Nest thermostat handle a single pole double pole situation? I have an older hot water system that needs a signal to open the valve and close the valve.
Both of my Google Nest Thermostats simultaneously got the e298 error saying no power. The wiring is fine. The power supply is fine. Not sure why this is happening.
