With hot water support, Google Home app now offers complete Nest Thermostat cont... Read more
Are you a homeowner and you are selling your home and leaving your Google Nest Thermostat for the new owner? What do you need to do to make the transfer painless for you and the new owner? First and foremost, DO NOT PERFORM A FACTORY RESET. The Googl...
Here are some steps I recommend to resolve issues during the setup of Nest Thermostats.Before trying these stepsMake sure you're using the correct app for setup. Need help checking which model you have? Use the Google Home app to set up the following...
This post is to help someone else out. I solved my issue, but I'm posting to maybe help someone else that is having the same issue. It'll save them hours of research and headache. Setting up Nest on Dual zone/Dual Thermostat HVAC system(one upstairs ...
We used to be able to control our thermostat from our phone. Since we got a new router from x-finity we have not been able to do anything from our phone. All we see is the home screen. Do you have any suggestions?
Nest power connector wired to a Honeywell v8043f1051 zone valve as pictured below. Wiring schematic shows the three terminals on the bottom as TH/TR (wired to red) TH (wired to white) and TR (wired to C on the power connector). Multimeter shows 26.8 ...
my existing thermostat was broken so wondering replace it with google nest learning thermostat. i opened the old thermostat and find it only has red and green line available. so just ask any expert here does those two colour lines compatible with the...
Hellonest gen 3 learning thermostattells me it is heatingbut furnace does not turn onwiring is correctwhat should I do nexti installed a couple days agoi appreciate any advice
On a daily (or every other day) basis, I will go into my Google Home app to adjust the temp on my Nest Thermostat and it will say “Offline”. The only way I have found to rectify this is to physically go to the thermostat and restart it. Which means I...
I just bought a learning thermostat with two temp sensors. I cannot get the thermostat to connect to the assisting device. I was sent a Nest Max Hub in the mail from, I assume Google, completely out-of-the-blue. I may have set it up incorrectly. This...
I have two wires from my old thermostat, green RH and White w1. When I turned the power from the fuse box back on, Nest is not turning on line instructions say it would. What now?
i only have red, white and blue wires and the compatibility checker asked me to contact support to confirm compatibility. Will the nest work with my system or do I need to install a constant power wire for it to work?Thanks in advance.
I am setting up my Nest Thermostat and receiving an error that the unit is unable to connect to WiFi. Subsequent to that, I started to receive error code 260 indicating that the Y wire was not connected. I was able to install the first Nest unit with...
User | Count |
---|---|
12 | |
11 | |
11 | |
9 | |
9 |