With hot water support, Google Home app now offers complete Nest Thermostat cont... Read more
Forum Posts
Selling your home along with a Nest Thermostat?
Are you a homeowner and you are selling your home and leaving your Google Nest Thermostat for the new owner? What do you need to do to make the transfer painless for you and the new owner? First and foremost, DO NOT PERFORM A FACTORY RESET. The Googl...
Troubleshoot setup: Nest Thermostats
Here are some steps I recommend to resolve issues during the setup of Nest Thermostats.Before trying these stepsMake sure you're using the correct app for setup. Need help checking which model you have? Use the Google Home app to set up the following...
Nest Learning Thermostat turns furnace off before reaching target temperature
And then I hear it trying to turn back on repeatedly. When I turn the target temp below current temp, and then let it rest for several minutes then raise the target temp, it turns back on. Then runs for several minutes, shuts off, tries to restart, e...
Replacing Honeywell heat only thermostat
My Honeywell donut thermostat has only two wires: a red and a blue. I connected the red to the R terminal on my Nest thermostat and tried connecting the blue to the W (no luck) then the O/B and finally the Y because the app said the Y needed to be co...
Thermostat automatically sets to 72 at 7 PM (schedule is empty)
I seem to be having the same issue as this post:https://www.googlenestcommunity.com/t5/Nest-Thermostats/Nest-thermostat-changes-ac-to-72-even-without-schedule/m-p/16637I have completely removed all points on my heating schedule in the app, disabled “...
Nest 3rd Gen display says remove from base
We have just started installation of 3rd gen thermostat, followed instructions but when I connect the base the display says remove from base. Once removed it says plug into base, I have done thus hundreds of times. I've checked the wires and the are ...
Eco comes on while we're home.
In the last month our ECO temperatures come on while we are home. We did not program this to run at all since we like having control over our system.How can we turn off ECO?
Nest Gen3 thermostat on cool only mode kicks on AC along with the emergency heat
Thanks for anyone taking the time to help me out on this, it's been driving me nuts. So I had a new system put in 3 years ago. And from day 1 it had a Nest Gen 3 making everything work. My setup is a 2 stage A/C + Heatpump setup and a boiler that doe...
Nest Thermostat is offline with error e298
My Nest smart stat won’t install. It doesn’t connect and I get a “no power e298” error. I have an older York Diamond80 gas 24volt furnace. Wiring is red with an rh jumper, white to w, green to g and I installed a c-wire using blue to c terminal. I wa...
Nest thermostat- WiFi connectivity error
HiOur Nest thermostat was working fine for the last 1.5 years. Suddenly, it started to connect to WiFi.we couldn’t access the nest app from phone for the last 2 months.we tried resetting multiple times. But, still having the same issue. Couldn’t do s...
Nest wiring common question
So I have a hydronic radiant heat only system. T stats wire is 4 wire (r,w,o,b) but only r & w used with current dumb stats. I tried using the orange as a common by wiring it to the “c” connector on stat and the Com screw terminal on the taco relay s...
TD030 error on device add
I am trying to add two nest thermostats to my nest app. I can add one, but then the second one fails to connect with a TD030 error. If I then remove the working device, I can add the second device perfectly, but then it can't connect the original wor...
Sign In to vote
