With hot water support, Google Home app now offers complete Nest Thermostat cont... Read more
Are you a homeowner and you are selling your home and leaving your Google Nest Thermostat for the new owner? What do you need to do to make the transfer painless for you and the new owner? First and foremost, DO NOT PERFORM A FACTORY RESET. The Googl...
Here are some steps I recommend to resolve issues during the setup of Nest Thermostats.Before trying these stepsMake sure you're using the correct app for setup. Need help checking which model you have? Use the Google Home app to set up the following...
I have a UNILUX fan coil HVAC system in my unit. I am interested in the Nest 3rd gen learning thermostat. Can I replace with a NEST?
I am unable to get enough power to my nest thermostat. I have forced hot air and cooling with multiple zones. I original had a 3 wire (R,W and Y). I ran another 2 wire with it to my furnace zone control board. I tried using one wire as the C Wire and...
How do I hook up multiple thermostats in the zone controller box? Do I need a separate power connector for each thermostat?
Keep getting the "remove the Nest from base and reattach it" message. I've confirmed wires are properly trimmed and inserted and are not bulging into back of device. What else should I try before I return it.
I have installed the T-stat and wired it to the HZ432. Heating works well. However, the two dampers in my system are not responding appropriately, resulting in on even heating. Any thoughts?
I installed a nest learning thermostat. I really only needed to monitor the heat while I am away for long periods of time, because of a faulty two year old furnace. It’s been five days or so, I set the temperature at 71 degrees, and the actual temper...
My Heat Link suddenly stopped working, can't be turned on, no power light at all. I've tried to reset it by pressing and holding a button for 10, and 20 seconds but it didn't help. I've checked wiring connections, everything seems to be like it shoul...
I have an old honeywell round thermostat. Rh Rc W Y G. Nest says not compatible however looking at compatible systems, I have a furnace/ hot water cycle and a separate cooling system with a fan only setting. IS there a way to get this to work with th...
I try to hook up the nest thermostat and I have two wires only white and red old thermostat had a jumper wire from RH to RCInstall but not powering up the thermostatSeems like it’s not compatible with this heat only system
| User | Count |
|---|---|
| 12 | |
| 9 | |
| 8 | |
| 8 | |
| 7 |