Are you a homeowner and you are selling your home and leaving your
Google Nest Thermostat for the new owner? What do you need to do to make
the transfer painless for you and the new owner? First and foremost, DO
NOT PERFORM A FACTORY RESET. The Googl...
Here are some steps I recommend to resolve issues during the setup of
Nest Thermostats.Before trying these stepsMake sure you're using the
correct app for setup. Need help checking which model you have? Use the
Google Home app to set up the following...
I am adding a 3rd NEST Thermostat E to my home. I removed a Google NEST
Thermostat from this same location and I am replacing it with the
Thermostat E. The entry key and the serial number are accepted fine.I
continue to get an error about "Your therm...
Purchased Nest Learning Thermostat Gen 3. After what the app detected as
a successful setup I have 2 issues:1. Thermostat is on the heat setting.
The thermostat is set to 66 degrees, it is about 63 in the house. Blower
turns on about every 8-9 min, r...
We selected away mode Thursday and got back Saturday. However, our
heating history shows that on Friday our heating history shows it was on
for 9.5 hrs. Not sure why?
No tech support for their products.Anyone know how to get your
thermostat to self adjust indoor humidity level output to humidifier in
relation to changes in outdoors temps to protect windows? Seems like a
pretty important issue to not have any expla...
Hello, I'm trying to find out if the nest thermostat relay will work on
a 2 wire system. Running a C wire will really be difficult and The Hvac
tech and i need to know if it will work before we waste our time or
money. Thank you
I am starting a new job that has a two week rotating schedule....two
days on, followed by two days off then three days on followed by three
days off.....repeat. How to manually create a schedule on my thermostat
to accommodate that schedule?
The Heat Link is mains powered from the boiler, but there is no 12v
supply to the Nest Thermostat. Hence I have no heat and no hot water.
Pressing the centre button has no effect. Pl
