With hot water support, Google Home app now offers complete Nest Thermostat cont... Read more
Are you a homeowner and you are selling your home and leaving your Google Nest Thermostat for the new owner? What do you need to do to make the transfer painless for you and the new owner? First and foremost, DO NOT PERFORM A FACTORY RESET. The Googl...
Here are some steps I recommend to resolve issues during the setup of Nest Thermostats.Before trying these stepsMake sure you're using the correct app for setup. Need help checking which model you have? Use the Google Home app to set up the following...
Hi. Just curious as things seem to be working ok. Was able to install my Nest Learning Thermostat just fine following the instructions but wondering if the old thermostat had what could be considered a jumper wire.In the attached picture of the old w...
Installed the Learning Thermostat around mid September and the graphs show the electric use for cooling (almost to the point we'll need heating), during the first 30 days.Looks like we're reducing the electricity used for cooling by . The proof will ...
I do not have a yellow wire. Whet next?
We installed a Nest Learning Thermostat 3rd generation in 2019 and intermittently had low battery warnings / wifi disconnecting, usually more often in spring and fall when the system ran less often. We do not have a C wire. We were going to pull new ...
Hi, I currently have a white Rodgers thermostat with a white wire in W, red wire in RH (with a jumper wire to RC), a blue wire in B, nothing in C, a green wire in G, brown wire in O, and a yellow wire in Y. I’m having trouble determining where the bl...
Wanted to check to be sure. I have a heat only thermostat connected as indicates in the photo. I was ‘guessing’ the white wire going to (old) Rh/Rc with jumper would go to the R on the NestAnd the red wire going to the (old) W/E would go to the W on...
Hi,I would like to know if my thermostat wiring is compatible with the Nest thermostat?I have attached a picture for your reference.I have a heating cooling single compressor system with gas heating.In my current thermostat there are 5 wires connect...
Where to connect C wire in furnace? Older Lennox GH6-100C furnace. No 'C' Terminal (nor Control Board): Only available terminals are three on gas control - red from thermostat, white from thermostat,/'24V' terminal on transformer, and the terminal th...
User | Count |
---|---|
10 | |
10 | |
8 | |
7 | |
7 |