With hot water support, Google Home app now offers complete Nest Thermostat cont... Read more
Are you a homeowner and you are selling your home and leaving your Google Nest Thermostat for the new owner? What do you need to do to make the transfer painless for you and the new owner? First and foremost, DO NOT PERFORM A FACTORY RESET. The Googl...
Here are some steps I recommend to resolve issues during the setup of Nest Thermostats.Before trying these stepsMake sure you're using the correct app for setup. Need help checking which model you have? Use the Google Home app to set up the following...
Heat Link was wired for power with the 240v and thermostat connected to it for the 12V few weeks ago suddenly both don't get any power. Tried to power cycle and left it disconnected for a while but the HeatLink doesn't give any sign of life. Powering...
I live in a new apt building. I have a Bulldog heat pump system. From doing the compatibility check my system should be compatible. I installed the nest and matched the wires exactly from old thermostat to the nest. Y - yellowW, O\B - whiteG - greenR...
It might be hard to see, but there is also a green wire that my current thermostat doesn't use
I have heat, no AC. I’ve had the Nest thermostat for almost exactly four years.In the last couples weeks, the fan started running randomly running for a couple minutes at a time, usually around the same time and pattern. This week, it has started mor...
Hello, I have 2 Nest thermostats on a dual zone system. The issue I’m having is both zones are allowed to run at the same time. Previously, if zone 1 is actively cooling and zone 2 requests air…zone 2 will wait until zone 1 I finished. But now with t...
So my goal is to have my Temperature stay the same, and not change when I leave the house. There is no possible way to disable or turn off Comfort/Eco/ or Sleep mode. If you navigate to the Temperature Presets within the Home app, you have to have a ...
Hi I am posting a photo of my current thermostat.The wires connected are Red (C), White (W), Green (G), Yellow (Y), jumpwire (connects C and R).Is my system compatible with Nest Learning Thermostat?
Hello, I have a Nest Thermostat connected to a Heat Only gas boiler looking to run common from my Taco 6-Zone SR506. I have connected my Power and Heat, but the common still says not detected. I have an extra wire at my thermostat that is also at my ...
This thermostat is the master in a 3 zone system - no heat pump, forced air and oil heating but we still have o and b wires. I have installed the slave, with a C wire adapter (Green to C wire, Y and R, no O or B) and the system works. Now I am stumpe...
A week ago we had an issue with our ac unit and replaced a couple parts and now I keep getting a Y1 wire error. If I pull the nest off the wall and then put it back it starts working fine. Why is this all of a sudden happening??
User | Count |
---|---|
11 | |
10 | |
9 | |
9 | |
9 |