With hot water support, Google Home app now offers complete Nest Thermostat cont... Read more
Are you a homeowner and you are selling your home and leaving your Google Nest Thermostat for the new owner? What do you need to do to make the transfer painless for you and the new owner? First and foremost, DO NOT PERFORM A FACTORY RESET. The Googl...
Here are some steps I recommend to resolve issues during the setup of Nest Thermostats.Before trying these stepsMake sure you're using the correct app for setup. Need help checking which model you have? Use the Google Home app to set up the following...
It's been working fine for a few years [new Dec 2016]. 2 months ago during the summer the heat came on even when the Nest was in the off mode. Had to disconnect the Nest from the furnace [problem was the Nest, not the furnace]. Rebooting the Nest did...
When I set the temperature, the heating starts ok. However, heating does not switch off when it reaches the desired temperature and just keeps going. It’s not that it does not switch off immediately: it doesn’t switch off at all.
My heatlink suddenly stopped working. It has no lights and I can't turn on my heating. The bolier has power and is heating the hot water Ok. The thermostat won't connect to the heatlink
I have a nest thermostat that tells me that it is asking the boiler to heat the house because the actual temperature is lower than the target temperature, but the boiler isn't receiving the signal and is still off...
I have been trying to get a replacement nest thermostat for almost 2 years. First fault was that it wouldn’t connect WiFi and so the app was worthless. Somehow got routed to the Is store and they sent me a US wired/powered replacement when I live in ...
Hi my Nest heatlink has stopped working, it has power to it but no lights any help would be appreciated
Need help winning Nest Gen 3. Have 5 wires in picture above. Green to G, Blue to C, Red to R, White to W, and Yellow to Y. On NEST Gen 3 I put Green to G, Red to R, Blue to B/O, Yellow to Y1 and White to Y2. Is this correct?
My heat cuts out before reaching the desired temperature.
How do you connect more than one device to a Nest thermostat? We have one connected, but now when you go into settings on the thermostat it no longer displays the key, so can’t connect another one! Many thanks.
I am replacing the BDR91 with an nest e. I have had a look on various threads but my BDR91 seems to be wired differently to others There is a bridge wire from L on the left, to A on the right. im assuming the B would go to NO and live on the left to ...
User | Count |
---|---|
12 | |
11 | |
11 | |
9 | |
9 |